A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine controller MERCEDES BENZ A6461532891 0281012068 CR3.31
Vendors's code: A6461532891
Product code: 0281012068
Barcode:
Code 39:
ISBN:
€243.90
Price
€243.90
Regular price:
€243.90
0%
€300.00
Price
€300.00
Regular price:
€300.00
0%
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine controller MERCEDES BENZ A6461532891 0281012068 CR3.31
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Mercedes-Benz A6461532891 0281012068 CR3.31 – Engine ECU
Tested Mercedes-Benz engine ECU A6461532891 / 0281012068, version CR3.31, supplied with warranty and fast worldwide shipping.
Q&A – Mercedes-Benz A6461532891 0281012068 CR3.31 engine ECU
How can I check if the Mercedes-Benz A6461532891 ECU is suitable for my vehicle?
The safest way is to compare the A6461532891 part number with the number shown on the original Mercedes-Benz engine ECU. Matching part numbers helps ensure that you order the correct unit for your vehicle.
Where can I find the Bosch 0281012068 number on a Mercedes-Benz ECU?
The Bosch 0281012068 number can be found on the label of the Mercedes-Benz engine ECU. Before ordering, compare it directly with the number on the unit removed from your vehicle.
Is the Mercedes-Benz CR3.31 0281012068 engine ECU tested before shipping?
Yes. The Mercedes-Benz CR3.31 0281012068 ECU is checked before sale and supplied with a warranty, so you receive a verified part ready for further preparation or installation.
Does the Mercedes-Benz A6461532891 CR3.31 ECU come with a warranty?
Yes. The Mercedes-Benz engine ECU marked A6461532891 CR3.31 is sold with a warranty, and orders are prepared for fast shipping.
What should I check before buying a Mercedes-Benz 0281012068 A6461532891 ECU?
Before ordering the Mercedes-Benz 0281012068 A6461532891 engine ECU, compare all part numbers with your original unit. Similar-looking Mercedes-Benz ECUs may be available in different versions.
