A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS control unit Audi 80 100 0265104005 4A0907379E
Vendors's code: 0265104005
Product code: 2646-8720B
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How to choose the ABS control unit for the Audi 80 100?
This is a used, working ABS control unit for the Audi 80 100 - numbers 0 265 104 005 / 0265104005; 4A0907379E. Before buying, compare the numbers with the label on the unit in your car.
ABS control unit Audi 80 100
The ABS control unit is an electronic module of the brake system that analyses wheel sensor signals and controls brake pressure. This listing is for: Audi 80 100. The part is used, working and in good condition.
Numbers to compare
- 0 265 104 005 / 0265104005 - manufacturer number (Bosch)
- 4A0907379E - VAG group number (OEM)
Application according to the listing
- Audi 80 100 - model
- Bosch - manufacturer
What the control unit does
In many models the module needs coding or adaptation after replacement. Check this for your model before ordering.
Fitment
Compare the number 0 265 104 005 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model alone.
Signs of a faulty control unit
- sometimes the ESP or ASR light comes on as well,
- the speedometer shows wrong values (if it uses the ABS signal),
- the ABS light is on right after starting the engine,
- an ABS fault appears after a battery change.
Remember that the unit may need coding or adaptation after replacement - check this for your model.
Questions and answers
| Where can I find the number on the control unit? |
|---|
| The number is on the label or housing of the unit, visible once it is removed from the car. If you cannot read it, send us a photo. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector and housing show no cracks or corrosion. |
| What does "used, working" mean? |
| We sell it as a used part, working and in good condition, with a 6-month warranty. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right unit for your car.