A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS control unit Audi 80 B4 0265100037 443907379C
Vendors's code: 0265100037
Product code: 9832-99215
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the control unit with number 0265100037 fit your car?
This is a used, working ABS control unit for the Audi 80 B4 - numbers 0 265 100 037 / 0265100037; 443 907 379 C / 443907379C. Before buying, compare the numbers with the label on the unit in your car.
ABS control unit Audi 80 B4
For the Audi 80 B4 (1988-1992) we offer a used unit that manages the ABS; match it by the numbers in the list. It is working and in good condition.
Numbers to compare
- 0 265 100 037 / 0265100037 - manufacturer number (Bosch)
- 443 907 379 C / 443907379C - VAG group number (OEM)
Application according to the listing
- Audi 80 B4 - model
- 1988-1992 - year
- Bosch - manufacturer
What the control unit does
The same car model may have had several unit versions depending on drive, equipment and year. The label numbers tell these versions apart.
Fitment
We also stock other units for this model with different numbers. Choose by the label number, not by the model and year alone.
Signs of a faulty control unit
- the ABS warning light is on,
- the ABS stops working during braking,
- the unit does not communicate with the scan tool,
- sometimes the ESP or ASR light comes on as well.
The braking system is critical for safety - have the ABS checked at a garage after replacement.
Questions and answers
| What condition is this part in? |
|---|
| It is a used part, working and in good condition. The warranty is 6 months. |
| Does the control unit need coding after replacement? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after replacement. |
| Where can I find the number on the control unit? |
| The number is on the label or housing of the unit, visible once it is removed from the car. If you cannot read it, send us a photo. |
Send fitment questions to contact@auto24parts.com - give the model, year and the number on the unit.