A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS control unit Audi 80 B4 0265100056 4A0907379A
Vendors's code: 0265100056
Product code: 99F9-791BA
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Control unit with number 0265100056 - is it the right part?
This is a used, working ABS control unit for the Audi 80 B4 - numbers 0 265 100 056 / 0265100056; 4A0 907 379 A / 4A0907379A. Before buying, compare the numbers with the label on the unit in your car.
ABS control unit Audi 80 B4
The module in this listing handles the anti-lock braking system in: Audi 80 B4. Match it by the numbers in the list. It is used, working and in good condition.
Numbers to compare
- 0 265 100 056 / 0265100056 - manufacturer number (Bosch)
- 4A0 907 379 A / 4A0907379A - VAG group number (OEM)
Application according to the listing
- Audi 80 B4 - model
- 2.6 - engine according to the listing
- Bosch - manufacturer
What the control unit does
The unit is part of a safety system, so compare the numbers carefully before buying. A mismatched version may not work with the sensors or hydraulic unit.
Fitment
We have several units for this model with different numbers. The label number decides, not the model name.
Signs of a faulty control unit
- the ABS and brake lights stay on after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors are fine,
- the unit overheats or resets.
It is worth reading the fault codes first, as some ABS faults come from wheel sensors or wiring rather than the unit itself.
Questions and answers
| What condition is this part in? |
|---|
| It is a used part, working and in good condition. The warranty is 6 months. |
| Does the control unit need coding after replacement? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after replacement. |
| Is the hydraulic unit (ABS pump) included? |
| This listing is for the control unit described in the title. If you also need the pump, write to us before buying and we will confirm exactly what is included. |
Write to contact@auto24parts.com with the model, year and the number on your unit - we will check the fit.