A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS control unit Audi A6 A8 0265109043 4D0907379L
Vendors's code: 0265109043
Product code: 4663-4583B
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How to choose the ABS control unit for the Audi A6 A8?
This is a used, working ABS control unit for the Audi A6 A8 - numbers 0 265 109 043 / 0265109043; 4D0 907 379 L / 4D0907379L. Before buying, compare the numbers with the label on the unit in your car.
ABS control unit Audi A6 A8
In the Audi A6 A8 (1995) the ABS control unit decides when and how hard to modulate brake pressure. We sell a used, working unit in good condition.
Numbers to compare
- 0 265 109 043 / 0265109043 - manufacturer number (Bosch)
- 4D0 907 379 L / 4D0907379L - VAG group number (OEM)
Application according to the listing
- Audi A6 A8 - model
- 1995 - year
- Bosch - manufacturer
What the control unit does
The unit's electronics consist of a processor, valve driver stages and sensor input circuits. Each of these can fail independently, which causes different symptoms.
Fitment
Compare the number 0 265 109 043 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model and year alone.
Signs of a faulty control unit
- the ABS and brake lights stay on after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors are fine,
- the unit overheats or resets.
It is worth reading the fault codes first, as some ABS faults come from wheel sensors or wiring rather than the unit itself.
Questions and answers
| Is the part new? |
|---|
| The control unit is used but working. It comes with a 6-month warranty. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector and housing show no cracks or corrosion. |
| How do I check whether the control unit will fit my car? |
| Compare the model, year, engine and the numbers on the unit fitted in your car with those in the description. You can also send us a photo. |
Send fitment questions to contact@auto24parts.com - give the model, year and the number on the unit.