A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS control unit BMW 5 0265100020
Vendors's code: 0265100020
Product code: 9BE8-364CB
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS control unit for the BMW 5 - what should you check before buying?
This is a used, working ABS control unit for the BMW 5 - numbers 0 265 100 020 / 0265100020. Before buying, compare the numbers with the label on the unit in your car.
ABS control unit BMW 5
In the BMW 5 the ABS control unit decides when and how hard to modulate brake pressure. We sell a used, working unit in good condition.
Numbers to compare
- 0 265 100 020 / 0265100020 - manufacturer number (Bosch)
Application according to the listing
- BMW 5 - model
- Bosch - manufacturer
What the control unit does
The unit receives the wheel speed sensor signals and compares them. When it detects that a wheel is starting to lock, it controls the valves in the brake system to reduce pressure and keep the car steerable.
Fitment
Compare the number 0 265 100 020 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model alone.
Signs of a faulty control unit
- no ABS reaction to wheel slip,
- the ABS light goes off and on by itself,
- the unit stops responding after moisture or corrosion,
- the ABS light stays on after a sensor change.
Start by checking the fuse and connectors; replace the unit only once the wiring and sensors are OK.
Questions and answers
| Where can I find the number on the control unit? |
|---|
| The number is on the label or housing of the unit, visible once it is removed from the car. If you cannot read it, send us a photo. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector and housing show no cracks or corrosion. |
| Can I fit a control unit from a different equipment version? |
| We do not assume so. Units differ in functions (ABS, ESP, ASR) and software, so compare the numbers and your car's version. |
Write to contact@auto24parts.com with the model, year and the number on your unit - we will check the fit.