A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS control unit BMW E32 E34 0265100049 06806182
Vendors's code: 0265100049
Product code: BD76-58842
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the control unit with number 0265100049 fit your car?
This is a used, working ABS control unit for the BMW E32 E34 - numbers 0 265 100 049 / 0265100049; 068 061 82 / 06806182. Before buying, compare the numbers with the label on the unit in your car.
ABS control unit BMW E32 E34
The module in this listing handles the anti-lock braking system in: BMW E32 E34 (1989-1995). Match it by the numbers in the list. It is used, working and in good condition.
Numbers to compare
- 0 265 100 049 / 0265100049 - manufacturer number (Bosch)
- 068 061 82 / 06806182 - additional part number
- 34.52-1 158 958 / 34521158958 - BMW number (OEM)
Application according to the listing
- BMW E32 E34 - model
- 1989-1995 - year
- Bosch - manufacturer
What the control unit does
In older cars the ABS unit is often a separate module, while in newer ones it is combined with the hydraulic unit. This listing is for the unit described in the title; we will confirm what is included on request.
Fitment
We have several units for this model with different numbers. The label number and year decide, not the model name.
Signs of a faulty control unit
- no ABS reaction to wheel slip,
- ESP or ASR does not switch on,
- power supply faults stored in the fault memory,
- the connector shows signs of corrosion.
Before buying, make sure the cause is not the power supply or harness, and only then replace the unit.
Questions and answers
| What condition is this part in? |
|---|
| It is a used part, working and in good condition. The warranty is 6 months. |
| Does the control unit need coding after replacement? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after replacement. |
| Can I fit a control unit from a different equipment version? |
| We do not assume so. Units differ in functions (ABS, ESP, ASR) and software, so compare the numbers and your car's version. |
For questions about fitment, write to contact@auto24parts.com and give the number on the label.