A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS control unit BMW E32 E34 E36 0265108002 34521090916
Vendors's code: 0265108002
Product code: 3A31-332DB
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the unit will fit the BMW E32 E34 E36?
This is a used, working ABS control unit for the BMW E32 E34 E36 - numbers 0 265 108 002 / 0265108002; 34.52-1 090 916 / 34521090916. Before buying, compare the numbers with the label on the unit in your car.
ABS control unit BMW E32 E34 E36
This ABS control unit is intended for: BMW E32 E34 E36. It is a used part, working and in good technical condition.
Numbers to compare
- 0 265 108 002 / 0265108002 - manufacturer number (Bosch)
- 34.52-1 090 916 / 34521090916 - BMW number (OEM)
Application according to the listing
- BMW E32 E34 E36 - model
- Bosch - manufacturer
What the control unit does
The same car model may have had several unit versions depending on drive, equipment and year. The label numbers tell these versions apart.
Fitment
Compare the number 0 265 108 002 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model alone.
Signs of a faulty control unit
- the ABS light stays on after a sensor change,
- the unit overheats or resets,
- the ABS warning light is on,
- no wheel speed reading.
Before buying, make sure the cause is not the power supply or harness, and only then replace the unit.
Questions and answers
| Where can I find the number on the control unit? |
|---|
| The number is on the label or housing of the unit, visible once it is removed from the car. If you cannot read it, send us a photo. |
| Why does the number have several spellings? |
| The same number may be written on the label with spaces, dashes or as one string. We give both forms to make it easier to find. |
| Which number matters most for fitment? |
| It is best to compare all the numbers on the label, above all the one marked as the manufacturer or OEM number. |
For questions about fitment, write to contact@auto24parts.com and give the number on the label.