A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS control unit Lexus GS 300 Toyota 8954030380
Vendors's code: 8954030380
Product code: 8F53-52114
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the unit will fit the Lexus GS 300 Toyota?
This is a used, working ABS control unit for the Lexus GS 300 Toyota - numbers 89540-30380 / 8954030380. Before buying, compare the numbers with the label on the unit in your car.
ABS control unit Lexus GS 300 Toyota
If the ABS light is on in your Lexus GS 300 Toyota (1998) or the system no longer works properly, the control unit may be the cause. We sell a used, working module in good condition.
Numbers to compare
- 89540-30380 / 8954030380 - part number
Application according to the listing
- Lexus GS 300 Toyota - model
- 1998 - year
What the control unit does
In versions with ESP or ASR, the same module also works with traction and stability control. The range of functions depends on the car's equipment and the unit number.
Fitment
Compare the number 89540-30380 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model and year alone.
Signs of a faulty control unit
- the ABS light goes off and on by itself,
- the wheels lock under hard braking,
- the scan tool shows a control unit or power supply fault,
- traction control switches off.
Inspect the unit's connector: corrosion or burnt pins cause symptoms similar to faulty electronics.
Questions and answers
| What does "used, working" mean? |
|---|
| We sell it as a used part, working and in good condition, with a 6-month warranty. |
| Is the hydraulic unit (ABS pump) included? |
| This listing is for the control unit described in the title. If you also need the pump, write to us before buying and we will confirm exactly what is included. |
| Does the control unit need coding after replacement? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after replacement. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right unit for your car.