A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS control unit Mercedes W124 0265101036
Vendors's code: 0265101036
Product code: E156-28736
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS control unit for the Mercedes W124 - what should you check before buying?
This is a used, working ABS control unit for the Mercedes W124 - numbers 0 265 101 036 / 0265101036. Before buying, compare the numbers with the label on the unit in your car.
ABS control unit Mercedes W124
The ABS control unit detects wheel lock-up and regulates pressure in the brake system. The unit on offer is for: Mercedes W124; it is used, working and in good condition.
Numbers to compare
- 0 265 101 036 / 0265101036 - manufacturer number (Bosch)
Application according to the listing
- Mercedes W124 - model
- Bosch - manufacturer
What the control unit does
In many models the module needs coding or adaptation after replacement. Check this for your model before ordering.
Fitment
Compare the number 0 265 101 036 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model alone.
Signs of a faulty control unit
- valve faults appear although the hydraulic unit is fine,
- the ABS works unevenly,
- the ABS light stays on after a sensor change,
- the unit stops responding after moisture or corrosion.
Start by checking the fuse and connectors; replace the unit only once the wiring and sensors are OK.
Questions and answers
| What does "used, working" mean? |
|---|
| We sell it as a used part, working and in good condition, with a 6-month warranty. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector and housing show no cracks or corrosion. |
| Which number matters most for fitment? |
| It is best to compare all the numbers on the label, above all the one marked as the manufacturer or OEM number. |
For questions about fitment, write to contact@auto24parts.com and give the number on the label.