Skip to main content
English €
English €
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English €
English €
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

ABS control unit Nissan X-Trail T30 478508H810 A98000U27

  • Part Type ABS control unit
  • Vehicle Make and Model Nissan X-Trail T30
  • Year of Manufacture 2003
  • Manufacturer Part Number 478508H810
  • OEM Part Number A98000U27
  • Warranty 6-month warranty
  • Condition Used, working, in good condition
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
ORYGINAL
with VAT without VAT
Price €125.00
Availability:
In stock
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Shipping time: 24 h
Ask about the product
Shipping from €30.00 - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type ABS control unit
  • Vehicle Make and Model Nissan X-Trail T30
  • Year of Manufacture 2003
  • Manufacturer Part Number 478508H810
  • OEM Part Number A98000U27
  • Warranty 6-month warranty
  • Condition Used, working, in good condition
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician

How to choose the ABS control unit for the Nissan X-Trail T30?

This is a used, working ABS control unit for the Nissan X-Trail T30 - numbers 478508H810; A98000U27. Before buying, compare the numbers with the label on the unit in your car.

Go to full description

ABS control unit Nissan X-Trail T30

Looking for a replacement for a faulty ABS control unit for the Nissan X-Trail T30 (2003)? We offer a used, working module in good condition.

Numbers to compare

  • 478508H810 - part number
  • A98000U27 - additional part number

Application according to the listing

  • Nissan X-Trail T30 - model
  • 2003 - year

What the control unit does

The unit's electronics consist of a processor, valve driver stages and sensor input circuits. Each of these can fail independently, which causes different symptoms.

Fitment

Compare the number 478508H810 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model and year alone.

Signs of a faulty control unit

  • the ABS light goes off and on by itself,
  • the wheels lock under hard braking,
  • the scan tool shows a control unit or power supply fault,
  • traction control switches off.

The braking system is critical for safety - have the ABS checked at a garage after replacement.

Questions and answers

What condition is this part in?
It is a used part, working and in good condition. The warranty is 6 months.
Is the hydraulic unit (ABS pump) included?
This listing is for the control unit described in the title. If you also need the pump, write to us before buying and we will confirm exactly what is included.
Why does the number have several spellings?
The same number may be written on the label with spaces, dashes or as one string. We give both forms to make it easier to find.

Not sure? Send a photo of your control unit to contact@auto24parts.com and we will check it for you.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Water-damaged ABS pump control module or a burnt-out one - what next?

    A water-damaged or burnt-out ABS pump control module most often lights up the dashboard like a 'Christmas tree' (ABS, ESP and the red brake warning light), leaves the diagnostic tool unable to communicate with the ABS module, makes the pump motor run non-stop or stops the speedometer working. Water usually gets into the module when the scuttle panel drains are blocked, after the engine bay has been cleaned with a pressure washer or after driving through a deep puddle, while a burnout is most often caused by a short circuit or a voltage spike. Below we describe the symptoms, what to do straight away and why drying or repairing such a module rarely gives lasting results.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more
  • How to test an ABS module and pump - failure symptoms and checks

    The most common symptom of a faulty ABS pump or ABS module is an ABS warning light that stays on after the engine starts, often together with the ESP light. The brakes still work, but without ABS the wheels can lock under hard braking. To test an ABS module, start by reading the fault codes with a diagnostic tool that can talk to the ABS unit, then check the power supply, the earth and the wheel speed sensors. Only when all of these are fine is the module itself usually to blame.

    Read more