A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS control unit Opel Calibra Kadett Vectra 0265103038 0265103038VD
Vendors's code: 0265103038
Product code: CD33-9812D
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS control unit for the Opel Calibra Kadett Vectra - what should you check before buying?
This is a used, working ABS control unit for the Opel Calibra Kadett Vectra - numbers 0 265 103 038 / 0265103038; 0265103038VD. Before buying, compare the numbers with the label on the unit in your car.
ABS control unit Opel Calibra Kadett Vectra
This ABS control unit is intended for: Opel Calibra Kadett Vectra (1990-1991). It is a used part, working and in good technical condition.
Numbers to compare
- 0 265 103 038 / 0265103038 - manufacturer number (Bosch)
- 0265103038VD - manufacturer number (Bosch)
Application according to the listing
- Opel Calibra Kadett Vectra - model
- 1990-1991 - year
- Bosch - manufacturer
What the control unit does
The unit's electronics consist of a processor, valve driver stages and sensor input circuits. Each of these can fail independently, which causes different symptoms.
Fitment
Compare the number 0 265 103 038 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model and year alone.
Signs of a faulty control unit
- no ABS reaction to wheel slip,
- ESP or ASR does not switch on,
- power supply faults stored in the fault memory,
- the connector shows signs of corrosion.
Before buying a unit, check the fuse, power supply, earth and wheel speed sensors - a damaged harness or sensor causes similar symptoms.
Questions and answers
| What condition is this part in? |
|---|
| It is a used part, working and in good condition, covered by a 6-month warranty. |
| Is the hydraulic unit (ABS pump) included? |
| This listing is for the control unit described in the title. If you also need the pump, write to us before buying and we will confirm exactly what is included. |
| Can I fit a control unit from a different equipment version? |
| We do not assume so. Units differ in functions (ABS, ESP, ASR) and software, so compare the numbers and your car's version. |
Write to contact@auto24parts.com with the model, year and the number on your unit - we will check the fit.