A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS control unit Opel Omega A Senator B 0265103016WE 0265103016
Vendors's code: 0265103016WE
Product code: DB69-7022A
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS control unit for the Opel Omega A Senator B - what should you check before buying?
This is a used, working ABS control unit for the Opel Omega A Senator B - numbers 0 265 103 016 WE / 0265103016WE; 0265103016. Before buying, compare the numbers with the label on the unit in your car.
ABS control unit Opel Omega A Senator B
If the ABS light is on in your Opel Omega A Senator B (1987-1989) or the system no longer works properly, the control unit may be the cause. We sell a used, working module in good condition.
Numbers to compare
- 0 265 103 016 WE / 0265103016WE - manufacturer number (Bosch)
- 0265103016 - manufacturer number (Bosch)
Application according to the listing
- Opel Omega A Senator B - model
- 1987-1989 - year
- 2.0 - engine according to the listing
- Bosch - manufacturer
What the control unit does
The same car model may have had several unit versions depending on drive, equipment and year. The label numbers tell these versions apart.
Fitment
Compare the number 0 265 103 016 WE in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model and year alone.
Signs of a faulty control unit
- the ABS and brake lights stay on after switching on the ignition,
- the brakes work, but without ABS assistance,
- the ABS light stays on after a sensor change,
- the ABS light goes off and on by itself.
Before buying a unit, check the fuse, power supply, earth and wheel speed sensors - a damaged harness or sensor causes similar symptoms.
Questions and answers
| What should I check on delivery? |
|---|
| Check that the numbers match the description and that the connector and housing show no cracks or corrosion. |
| Is the part new? |
| The control unit is used but working. It comes with a 6-month warranty. |
| Can I fit a control unit from a different equipment version? |
| We do not assume so. Units differ in functions (ABS, ESP, ASR) and software, so compare the numbers and your car's version. |
Not sure? Send a photo of your control unit to contact@auto24parts.com and we will check it for you.