A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS control unit Opel Vectra A 0265100039WH 0265100039
Vendors's code: 0265100039WH
Product code: 3560-66708
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the unit will fit the Opel Vectra A?
This is a used, working ABS control unit for the Opel Vectra A - numbers 0 265 100 039 WH / 0265100039WH; 0265100039. Before buying, compare the numbers with the label on the unit in your car.
ABS control unit Opel Vectra A
The module in this listing handles the anti-lock braking system in: Opel Vectra A (1994). Match it by the numbers in the list. It is used, working and in good condition.
Numbers to compare
- 0 265 100 039 WH / 0265100039WH - manufacturer number (Bosch)
- 0265100039 - manufacturer number (Bosch)
Application according to the listing
- Opel Vectra A - model
- 1994 - year
- Bosch - manufacturer
What the control unit does
A faulty unit usually turns on the ABS light, sometimes also ESP or ASR. The normal brakes keep working, but without anti-lock assistance.
Fitment
Compare the number 0 265 100 039 WH in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model and year alone.
Signs of a faulty control unit
- the ABS light comes on only once the car has warmed up,
- the brake pedal pulses for no reason,
- no CAN communication with the module,
- the car enters brake system limp mode.
The braking system is critical for safety - have the ABS checked at a garage after replacement.
Questions and answers
| What condition is this part in? |
|---|
| It is a used part, working and in good condition. The warranty is 6 months. |
| Does the control unit need coding after replacement? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after replacement. |
| Do you also sell connectors or ABS sensors? |
| This listing is for the control unit only. You will find other parts in the other shop categories, or ask us about availability. |
Send a photo of your control unit or its number to contact@auto24parts.com and we will confirm whether this part fits.