A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS control unit Renault Magnum 0265150328 5010201469
Vendors's code: 0265150328
Product code: DA2F-338A8
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS control unit fit the Renault Magnum?
This is a used, working ABS control unit for the Renault Magnum - numbers 0 265 150 328 / 0265150328; 5 010 201 469 / 5010201469. Before buying, compare the numbers with the label on the unit in your car.
ABS control unit Renault Magnum
The ABS control unit detects wheel lock-up and regulates pressure in the brake system. The unit on offer is for: Renault Magnum; it is used, working and in good condition.
Numbers to compare
- 0 265 150 328 / 0265150328 - manufacturer number (Bosch)
- 5 010 201 469 / 5010201469 - additional part number
Application according to the listing
- Renault Magnum - model
- Bosch - manufacturer
What the control unit does
In many models the module needs coding or adaptation after replacement. Check this for your model before ordering.
Fitment
Compare the number 0 265 150 328 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model alone.
Signs of a faulty control unit
- the ABS warning light is on,
- the ABS stops working during braking,
- the unit does not communicate with the scan tool,
- sometimes the ESP or ASR light comes on as well.
It is worth reading the fault codes first, as some ABS faults come from wheel sensors or wiring rather than the unit itself.
Questions and answers
| Is the part new? |
|---|
| The control unit is used but working. It comes with a 6-month warranty. |
| Does the control unit need coding after replacement? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after replacement. |
| Is the hydraulic unit (ABS pump) included? |
| This listing is for the control unit described in the title. If you also need the pump, write to us before buying and we will confirm exactly what is included. |
Not sure? Send a photo of your control unit to contact@auto24parts.com and we will check it for you.