A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS control unit Scania 4 0486106008 4143866
Vendors's code: 0486106008
Product code: 255F-33854
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS control unit for the Scania 4 - what should you check before buying?
This is a used, working ABS control unit for the Scania 4 - numbers 0 486 106 008 / 0486106008; 4 143866 / 4143866. Before buying, compare the numbers with the label on the unit in your car.
ABS control unit Scania 4
The ABS control unit detects wheel lock-up and regulates pressure in the brake system. The unit on offer is for: Scania 4 (1995-2005); it is used, working and in good condition.
Numbers to compare
- 0 486 106 008 / 0486106008 - manufacturer number (Bosch)
- 4 143866 / 4143866 - additional part number
Application according to the listing
- Scania 4 - model
- 1995-2005 - year
- Bosch - manufacturer
What the control unit does
The unit receives the wheel speed sensor signals and compares them. When it detects that a wheel is starting to lock, it controls the valves in the brake system to reduce pressure and keep the car steerable.
Fitment
Compare the number 0 486 106 008 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model and year alone.
Signs of a faulty control unit
- valve faults appear although the hydraulic unit is fine,
- the ABS works unevenly,
- the ABS light stays on after a sensor change,
- the unit stops responding after moisture or corrosion.
Inspect the unit's connector: corrosion or burnt pins cause symptoms similar to faulty electronics.
Questions and answers
| What condition is this part in? |
|---|
| It is a used part, working and in good condition. The warranty is 6 months. |
| Do you also sell connectors or ABS sensors? |
| This listing is for the control unit only. You will find other parts in the other shop categories, or ask us about availability. |
| Can I fit a control unit from a different equipment version? |
| We do not assume so. Units differ in functions (ABS, ESP, ASR) and software, so compare the numbers and your car's version. |
Write to contact@auto24parts.com with the model, year and the number on your unit - we will check the fit.