A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS control unit Volkswagen Audi 80 B4 0265103032 857907379D
Vendors's code: 0265103032
Product code: 8CD9-6188B
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the control unit with number 0265103032 fit your car?
This is a used, working ABS control unit for the Volkswagen Audi 80 B4 - numbers 0 265 103 032 / 0265103032; 857 907 379 D / 857907379D. Before buying, compare the numbers with the label on the unit in your car.
ABS control unit Volkswagen Audi 80 B4
The ABS control unit is an electronic module of the brake system that analyses wheel sensor signals and controls brake pressure. This listing is for: Volkswagen Audi 80 B4 (1991-1992). The part is used, working and in good condition.
Numbers to compare
- 0 265 103 032 / 0265103032 - manufacturer number (Bosch)
- 857 907 379 D / 857907379D - VAG group number (OEM)
Application according to the listing
- Volkswagen Audi 80 B4 - model
- 1991-1992 - year
- 2.8 V6 - engine according to the listing
- Bosch - manufacturer
What the control unit does
In older cars the ABS unit is often a separate module, while in newer ones it is combined with the hydraulic unit. This listing is for the unit described in the title; we will confirm what is included on request.
Fitment
The number 0 265 103 032 also appears in another listing. Compare all numbers with the label on your unit - we do not assume listings are interchangeable.
Signs of a faulty control unit
- valve faults appear although the hydraulic unit is fine,
- the ABS works unevenly,
- the ABS light stays on after a sensor change,
- the unit stops responding after moisture or corrosion.
It is worth reading the fault codes first, as some ABS faults come from wheel sensors or wiring rather than the unit itself.
Questions and answers
| What condition is this part in? |
|---|
| It is a used part, working and in good condition. The warranty is 6 months. |
| Where can I find the number on the control unit? |
| The number is on the label or housing of the unit, visible once it is removed from the car. If you cannot read it, send us a photo. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector and housing show no cracks or corrosion. |
Send fitment questions to contact@auto24parts.com - give the model, year and the number on the unit.