A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS ESP BAS control unit Mercedes W 210 0265109451 0275455632
Vendors's code: 0265109451
Product code: 7FA3-94928
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Is this Mercedes W 210 unit the right one for your car?
This is a used, working ABS ESP BAS control unit for the Mercedes W 210 - numbers 0 265 109 451 / 0265109451; 027 545 56 32 / 0275455632. Before buying, compare the numbers with the label on the unit in your car.
ABS ESP BAS control unit Mercedes W 210
This ABS ESP BAS control unit is intended for: Mercedes W 210 (1999-2000). It is a used part, working and in good technical condition.
Numbers to compare
- 0 265 109 451 / 0265109451 - manufacturer number (Bosch)
- 027 545 56 32 / 0275455632 - Mercedes-Benz number (OEM)
Application according to the listing
- Mercedes W 210 - model
- 1999-2000 - year
- Bosch - manufacturer
What the control unit does
The unit is part of a safety system, so compare the numbers carefully before buying. A mismatched version may not work with the sensors or hydraulic unit.
Fitment
Compare the number 0 265 109 451 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model and year alone.
Signs of a faulty control unit
- no ABS reaction to wheel slip,
- ESP or ASR does not switch on,
- power supply faults stored in the fault memory,
- the connector shows signs of corrosion.
Start by checking the fuse and connectors; replace the unit only once the wiring and sensors are OK.
Questions and answers
| What condition is this part in? |
|---|
| It is a used part, working and in good condition, covered by a 6-month warranty. |
| Do you also sell connectors or ABS sensors? |
| This listing is for the control unit only. You will find other parts in the other shop categories, or ask us about availability. |
| Does the control unit need coding after replacement? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after replacement. |
Send fitment questions to contact@auto24parts.com - give the model, year and the number on the unit.