A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS ESP BAS control unit Mercedes W168 0265109449 A0275456032
Vendors's code: 0265109449
Product code: 6B10-78185
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Control unit with number 0265109449 - is it the right part?
This is a used, working ABS ESP BAS control unit for the Mercedes W168 - numbers 0 265 109 449 / 0265109449; A 027 545 60 32 / A0275456032. Before buying, compare the numbers with the label on the unit in your car.
ABS ESP BAS control unit Mercedes W168
The ABS ESP BAS control unit is an electronic module of the brake system that analyses wheel sensor signals and controls brake pressure. This listing is for: Mercedes W168. The part is used, working and in good condition.
Numbers to compare
- 0 265 109 449 / 0265109449 - manufacturer number (Bosch)
- A 027 545 60 32 / A0275456032 - Mercedes-Benz number (OEM)
- 0275456032 - Mercedes-Benz number (OEM)
Application according to the listing
- Mercedes W168 - model
- Bosch - manufacturer
What the control unit does
In many models the module needs coding or adaptation after replacement. Check this for your model before ordering.
Fitment
We have several units for this model with different numbers. The label number decides, not the model name.
Signs of a faulty control unit
- the scan tool shows a control unit or power supply fault,
- sometimes the ESP or ASR light comes on as well,
- no ABS reaction to wheel slip,
- the unit overheats or resets.
Before buying a unit, check the fuse, power supply, earth and wheel speed sensors - a damaged harness or sensor causes similar symptoms.
Questions and answers
| Does the control unit need coding after replacement? |
|---|
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after replacement. |
| Why does the number have several spellings? |
| The same number may be written on the label with spaces, dashes or as one string. We give both forms to make it easier to find. |
| Is the hydraulic unit (ABS pump) included? |
| This listing is for the control unit described in the title. If you also need the pump, write to us before buying and we will confirm exactly what is included. |
Send a photo of your control unit or its number to contact@auto24parts.com and we will confirm whether this part fits.