A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS ESP BAS control unit Mercedes W168 A-Class 0265453632 0265109431
Vendors's code: 0265453632
Product code: 625F-32584
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the unit will fit the Mercedes W168 A-Class?
This is a used, working ABS ESP BAS control unit for the Mercedes W168 A-Class - numbers 026 545 36 32 / 0265453632; 0 265 109 431 / 0265109431. Before buying, compare the numbers with the label on the unit in your car.
ABS ESP BAS control unit Mercedes W168 A-Class
For the Mercedes W168 A-Class we offer a used unit that manages the ABS; match it by the numbers in the list. It is working and in good condition.
Numbers to compare
- 026 545 36 32 / 0265453632 - manufacturer number (Bosch)
- 0 265 109 431 / 0265109431 - manufacturer number (Bosch)
Application according to the listing
- Mercedes W168 A-Class - model
- Bosch - manufacturer
What the control unit does
The same car model may have had several unit versions depending on drive, equipment and year. The label numbers tell these versions apart.
Fitment
We have several units for this model with different numbers. The label number decides, not the model name.
Signs of a faulty control unit
- the ABS warning light is on,
- the ABS stops working during braking,
- the unit does not communicate with the scan tool,
- sometimes the ESP or ASR light comes on as well.
Remember that the unit may need coding or adaptation after replacement - check this for your model.
Questions and answers
| What condition is this part in? |
|---|
| It is a used part, working and in good condition. The warranty is 6 months. |
| Do you also sell connectors or ABS sensors? |
| This listing is for the control unit only. You will find other parts in the other shop categories, or ask us about availability. |
| Can I fit a control unit from a different equipment version? |
| We do not assume so. Units differ in functions (ABS, ESP, ASR) and software, so compare the numbers and your car's version. |
Send fitment questions to contact@auto24parts.com - give the model, year and the number on the unit.