A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS ESP BAS control unit Mercedes W210 0265109469 0295452232
Vendors's code: 0265109469
Product code: 68C6-628C4
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the unit will fit the Mercedes W210?
This is a used, working ABS ESP BAS control unit for the Mercedes W210 - numbers 0 265 109 469 / 0265109469; 029 545 22 32 / 0295452232. Before buying, compare the numbers with the label on the unit in your car.
ABS ESP BAS control unit Mercedes W210
This ABS ESP BAS control unit is intended for: Mercedes W210. It is a used part, working and in good technical condition.
Numbers to compare
- 0 265 109 469 / 0265109469 - manufacturer number (Bosch)
- 029 545 22 32 / 0295452232 - Mercedes-Benz number (OEM)
Application according to the listing
- Mercedes W210 - model
- Bosch - manufacturer
What the control unit does
In versions with ESP or ASR, the same module also works with traction and stability control. The range of functions depends on the car's equipment and the unit number.
Fitment
We also stock other units for this model with different numbers. Choose by the label number, not by the model alone.
Signs of a faulty control unit
- the ABS light comes on only once the car has warmed up,
- the brake pedal pulses for no reason,
- no CAN communication with the module,
- the car enters brake system limp mode.
Compare all numbers with the label on your unit, because the same car model may have had several versions.
Questions and answers
| What does "used, working" mean? |
|---|
| We sell it as a used part, working and in good condition, with a 6-month warranty. |
| Can I fit a control unit from a different equipment version? |
| We do not assume so. Units differ in functions (ABS, ESP, ASR) and software, so compare the numbers and your car's version. |
| Does the control unit need coding after replacement? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after replacement. |
Send a photo of your control unit or its number to contact@auto24parts.com and we will confirm whether this part fits.