A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS ESP BAS PML control unit Mercedes W210 0265109499 0315450832
Vendors's code: 0265109499
Product code: D02D-210F1
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS control unit for the Mercedes W210?
This is a used, working ABS ESP BAS PML control unit for the Mercedes W210 - numbers 0 265 109 499 / 0265109499; 031 545 08 32 / 0315450832. Before buying, compare the numbers with the label on the unit in your car.
ABS ESP BAS PML control unit Mercedes W210
The module in this listing handles the anti-lock braking system in: Mercedes W210 (2001). Match it by the numbers in the list. It is used, working and in good condition.
Numbers to compare
- 0 265 109 499 / 0265109499 - manufacturer number (Bosch)
- 031 545 08 32 / 0315450832 - Mercedes-Benz number (OEM)
- A 031 545 08 32 / A0315450832 - Mercedes-Benz number (OEM)
Application according to the listing
- Mercedes W210 - model
- 2001 - year
- Bosch - manufacturer
What the control unit does
In many models the module needs coding or adaptation after replacement. Check this for your model before ordering.
Fitment
We also stock other units for this model with different numbers. Choose by the label number, not by the model and year alone.
Signs of a faulty control unit
- the ABS light goes off and on by itself,
- the wheels lock under hard braking,
- the scan tool shows a control unit or power supply fault,
- traction control switches off.
Inspect the unit's connector: corrosion or burnt pins cause symptoms similar to faulty electronics.
Questions and answers
| What condition is this part in? |
|---|
| It is a used part, working and in good condition. The warranty is 6 months. |
| Does the control unit need coding after replacement? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after replacement. |
| Do you also sell connectors or ABS sensors? |
| This listing is for the control unit only. You will find other parts in the other shop categories, or ask us about availability. |
Send fitment questions to contact@auto24parts.com - give the model, year and the number on the unit.