A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS ESP BAS PML control unit Mercedes W210 0265455832 0265109439
Vendors's code: 0265455832
Product code: 0111-24483
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS control unit fit the Mercedes W210?
This is a used, working ABS ESP BAS PML control unit for the Mercedes W210 - numbers 0265455832; 0 265 109 439 / 0265109439. Before buying, compare the numbers with the label on the unit in your car.
ABS ESP BAS PML control unit Mercedes W210
If the ABS light is on in your Mercedes W210 or the system no longer works properly, the control unit may be the cause. We sell a used, working module in good condition.
Numbers to compare
- 0265455832 - manufacturer number (Bosch)
- 0 265 109 439 / 0265109439 - manufacturer number (Bosch)
- A 026 545 58 32 / A0265455832 - Mercedes-Benz number (OEM)
Application according to the listing
- Mercedes W210 - model
- Bosch - manufacturer
What the control unit does
In many models the module needs coding or adaptation after replacement. Check this for your model before ordering.
Fitment
We have several units for this model with different numbers. The label number decides, not the model name.
Signs of a faulty control unit
- the ABS light is on right after starting the engine,
- the scan tool cannot connect to the module,
- the speedometer shows wrong values (if it uses the ABS signal),
- the system works only intermittently.
Inspect the unit's connector: corrosion or burnt pins cause symptoms similar to faulty electronics.
Questions and answers
| What does "used, working" mean? |
|---|
| We sell it as a used part, working and in good condition, with a 6-month warranty. |
| Can a control unit with a different number fit too? |
| Sometimes, but we do not assume listings are interchangeable. Compare all numbers with the label on your unit or ask us. |
| Where can I find the number on the control unit? |
| The number is on the label or housing of the unit, visible once it is removed from the car. If you cannot read it, send us a photo. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right unit for your car.