A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS ESP control unit Audi A4 A6 0265109426 8D0907389A
Vendors's code: 0265109426
Product code: F31C-93213
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the unit will fit the Audi A4 A6?
This is a used, working ABS ESP control unit for the Audi A4 A6 - numbers 0 265 109 426 / 0265109426; 8D0 907 389 A / 8D0907389A. Before buying, compare the numbers with the label on the unit in your car.
ABS ESP control unit Audi A4 A6
The ABS ESP control unit is an electronic module of the brake system that analyses wheel sensor signals and controls brake pressure. This listing is for: Audi A4 A6 (1999). The part is used, working and in good condition.
Numbers to compare
- 0 265 109 426 / 0265109426 - manufacturer number (Bosch)
- 8D0 907 389 A / 8D0907389A - VAG group number (OEM)
Application according to the listing
- Audi A4 A6 - model
- 1999 - year
- Bosch - manufacturer
What the control unit does
The unit's electronics consist of a processor, valve driver stages and sensor input circuits. Each of these can fail independently, which causes different symptoms.
Fitment
We also stock other units for this model with different numbers. Choose by the label number, not by the model and year alone.
Signs of a faulty control unit
- the ABS light is on right after starting the engine,
- the scan tool cannot connect to the module,
- the speedometer shows wrong values (if it uses the ABS signal),
- the system works only intermittently.
The braking system is critical for safety - have the ABS checked at a garage after replacement.
Questions and answers
| What condition is this part in? |
|---|
| It is a used part, working and in good condition. The warranty is 6 months. |
| Can a control unit with a different number fit too? |
| Sometimes, but we do not assume listings are interchangeable. Compare all numbers with the label on your unit or ask us. |
Write to contact@auto24parts.com with the model, year and the number on your unit - we will check the fit.