A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS ESP control unit Audi Allroad 0265109613 4Z7907389A
Vendors's code: 0265109613
Product code: 64F5-602A0
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Is this Audi Allroad unit the right one for your car?
This is a used, working ABS ESP control unit for the Audi Allroad - numbers 0 265 109 613 / 0265109613; 4Z7 907 389 A / 4Z7907389A. Before buying, compare the numbers with the label on the unit in your car.
ABS ESP control unit Audi Allroad
This ABS ESP control unit is intended for: Audi Allroad (2003). It is a used part, working and in good technical condition.
Numbers to compare
- 0 265 109 613 / 0265109613 - manufacturer number (Bosch)
- 4Z7 907 389 A / 4Z7907389A - VAG group number (OEM)
Application according to the listing
- Audi Allroad - model
- 2003 - year
- Bosch - manufacturer
What the control unit does
The unit is part of a safety system, so compare the numbers carefully before buying. A mismatched version may not work with the sensors or hydraulic unit.
Fitment
Compare the number 0 265 109 613 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model and year alone.
Signs of a faulty control unit
- the ABS light comes on only once the car has warmed up,
- the brake pedal pulses for no reason,
- no CAN communication with the module,
- the car enters brake system limp mode.
Remember that the unit may need coding or adaptation after replacement - check this for your model.
Questions and answers
| What condition is this part in? |
|---|
| It is a used part, working and in good condition. The warranty is 6 months. |
| Can I fit a control unit from a different equipment version? |
| We do not assume so. Units differ in functions (ABS, ESP, ASR) and software, so compare the numbers and your car's version. |
| Can a control unit with a different number fit too? |
| Sometimes, but we do not assume listings are interchangeable. Compare all numbers with the label on your unit or ask us. |
Send fitment questions to contact@auto24parts.com - give the model, year and the number on the unit.