A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS ESP control unit Mercedes 0265109539 A2115406045
Vendors's code: 0265109539
Product code: 0622-900BC
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Control unit with number 0265109539 - is it the right part?
This is a used, working ABS ESP control unit for the Mercedes - numbers 0 265 109 539 / 0265109539; A2115406045. Before buying, compare the numbers with the label on the unit in your car.
ABS ESP control unit Mercedes
This ABS ESP control unit is intended for: Mercedes. It is a used part, working and in good technical condition.
Numbers to compare
- 0 265 109 539 / 0265109539 - manufacturer number (Bosch)
- A2115406045 - Mercedes-Benz number (OEM)
- A2115454932 - Mercedes-Benz number (OEM)
- A2114480302 - Mercedes-Benz number (OEM)
- A2114480202 - Mercedes-Benz number (OEM)
Application according to the listing
- Mercedes - model
What the control unit does
In versions with ESP or ASR, the same module also works with traction and stability control. The range of functions depends on the car's equipment and the unit number.
Fitment
We have several units for this model with different numbers. The label number decides, not the model name.
Signs of a faulty control unit
- power supply faults stored in the fault memory,
- the connector shows signs of corrosion,
- the scan tool cannot connect to the module,
- traction control switches off.
Remember that the unit may need coding or adaptation after replacement - check this for your model.
Questions and answers
| Does the control unit need coding after replacement? |
|---|
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after replacement. |
| Is the hydraulic unit (ABS pump) included? |
| This listing is for the control unit described in the title. If you also need the pump, write to us before buying and we will confirm exactly what is included. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector and housing show no cracks or corrosion. |
For questions about fitment, write to contact@auto24parts.com and give the number on the label.