A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS ESP control unit Peugeot 406 0265109414 9641316280
Vendors's code: 0265109414
Product code: 79A3-49898
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the unit will fit the Peugeot 406?
This is a used, working ABS ESP control unit for the Peugeot 406 - numbers 0 265 109 414 / 0265109414; 96 413 162 80 / 9641316280. Before buying, compare the numbers with the label on the unit in your car.
ABS ESP control unit Peugeot 406
If the ABS light is on in your Peugeot 406 or the system no longer works properly, the control unit may be the cause. We sell a used, working module in good condition.
Numbers to compare
- 0 265 109 414 / 0265109414 - manufacturer number (Bosch)
- 96 413 162 80 / 9641316280 - additional part number
Application according to the listing
- Peugeot 406 - model
- Bosch - manufacturer
What the control unit does
A faulty unit usually turns on the ABS light, sometimes also ESP or ASR. The normal brakes keep working, but without anti-lock assistance.
Fitment
Compare the number 0 265 109 414 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model alone.
Signs of a faulty control unit
- the ABS light comes on only once the car has warmed up,
- the brake pedal pulses for no reason,
- no CAN communication with the module,
- the car enters brake system limp mode.
Start by checking the fuse and connectors; replace the unit only once the wiring and sensors are OK.
Questions and answers
| Is the part new? |
|---|
| The control unit is used but working. It comes with a 6-month warranty. |
| Where can I find the number on the control unit? |
| The number is on the label or housing of the unit, visible once it is removed from the car. If you cannot read it, send us a photo. |
| Can a control unit with a different number fit too? |
| Sometimes, but we do not assume listings are interchangeable. Compare all numbers with the label on your unit or ask us. |
Write to contact@auto24parts.com with the model, year and the number on your unit - we will check the fit.