A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS ESP HBA control unit Mercedes W168 0265109630 A1685453532
Vendors's code: 0265109630
Product code: 31CC-90822
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How to choose the ABS control unit for the Mercedes W168?
This is a used, working ABS ESP HBA control unit for the Mercedes W168 - numbers 0 265 109 630 / 0265109630; A 168 545 35 32 / A1685453532. Before buying, compare the numbers with the label on the unit in your car.
ABS ESP HBA control unit Mercedes W168
For the Mercedes W168 (2002-2003) we offer a used unit that manages the ABS; match it by the numbers in the list. It is working and in good condition.
Numbers to compare
- 0 265 109 630 / 0265109630 - manufacturer number (Bosch)
- A 168 545 35 32 / A1685453532 - Mercedes-Benz number (OEM)
- 1685453532 - Mercedes-Benz number (OEM)
Application according to the listing
- Mercedes W168 - model
- 2002-2003 - year
- Bosch - manufacturer
What the control unit does
In many models the module needs coding or adaptation after replacement. Check this for your model before ordering.
Fitment
We have several units for this model with different numbers. The label number and year decide, not the model name.
Signs of a faulty control unit
- no ABS reaction to wheel slip,
- ESP or ASR does not switch on,
- power supply faults stored in the fault memory,
- the connector shows signs of corrosion.
Start by checking the fuse and connectors; replace the unit only once the wiring and sensors are OK.
Questions and answers
| What does "used, working" mean? |
|---|
| We sell it as a used part, working and in good condition, with a 6-month warranty. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector and housing show no cracks or corrosion. |
| Where can I find the number on the control unit? |
| The number is on the label or housing of the unit, visible once it is removed from the car. If you cannot read it, send us a photo. |
Send a photo of your control unit or its number to contact@auto24parts.com and we will confirm whether this part fits.