A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS ESP PML control unit Mercedes CLS 0265109541 A2115406445
Vendors's code: 0265109541
Product code: A2BC-119E8
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS control unit fit the Mercedes CLS?
This is a used, working ABS ESP PML control unit for the Mercedes CLS - numbers 0 265 109 541 / 0265109541; A2115406445. Before buying, compare the numbers with the label on the unit in your car.
ABS ESP PML control unit Mercedes CLS
If the ABS light is on in your Mercedes CLS or the system no longer works properly, the control unit may be the cause. We sell a used, working module in good condition.
Numbers to compare
- 0 265 109 541 / 0265109541 - manufacturer number (Bosch)
- A2115406445 - Mercedes-Benz number (OEM)
- A2115454832 - Mercedes-Benz number (OEM)
- A2304480202 - Mercedes-Benz number (OEM)
- A2114480202 - Mercedes-Benz number (OEM)
Application according to the listing
- Mercedes CLS - model
What the control unit does
The unit's electronics consist of a processor, valve driver stages and sensor input circuits. Each of these can fail independently, which causes different symptoms.
Fitment
Compare the number 0 265 109 541 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model alone.
Signs of a faulty control unit
- valve faults appear although the hydraulic unit is fine,
- the ABS works unevenly,
- the ABS light stays on after a sensor change,
- the unit stops responding after moisture or corrosion.
Inspect the unit's connector: corrosion or burnt pins cause symptoms similar to faulty electronics.
Questions and answers
| What condition is this part in? |
|---|
| It is a used part, working and in good condition. The warranty is 6 months. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector and housing show no cracks or corrosion. |
| How do I check whether the control unit will fit my car? |
| Compare the model, year, engine and the numbers on the unit fitted in your car with those in the description. You can also send us a photo. |
Not sure? Send a photo of your control unit to contact@auto24parts.com and we will check it for you.