A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS FMR control unit Mercedes Atego A0004462302 412413009003
Vendors's code: A0004462302
Product code: 27A4-412B1
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS control unit for the Mercedes Atego?
This is a used, working ABS FMR control unit for the Mercedes Atego - numbers A 000 446 23 02 / A0004462302; 412.413/009/003 / 412413009003. Before buying, compare the numbers with the label on the unit in your car.
ABS FMR control unit Mercedes Atego
The ABS FMR control unit detects wheel lock-up and regulates pressure in the brake system. The unit on offer is for: Mercedes Atego; it is used, working and in good condition.
Numbers to compare
- A 000 446 23 02 / A0004462302 - Mercedes-Benz number (OEM)
- 412.413/009/003 / 412413009003 - additional part number
Application according to the listing
- Mercedes Atego - model
What the control unit does
A faulty unit usually turns on the ABS light, sometimes also ESP or ASR. The normal brakes keep working, but without anti-lock assistance.
Fitment
Compare the number A 000 446 23 02 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model alone.
Signs of a faulty control unit
- an ABS fault appears after a battery change,
- unstable voltage at the module,
- the brake and ABS warning lights come on together,
- the brakes work, but without ABS assistance.
The braking system is critical for safety - have the ABS checked at a garage after replacement.
Questions and answers
| What condition is this part in? |
|---|
| It is a used part, working and in good condition. The warranty is 6 months. |
| Can I fit a control unit from a different equipment version? |
| We do not assume so. Units differ in functions (ABS, ESP, ASR) and software, so compare the numbers and your car's version. |
| Where can I find the number on the control unit? |
| The number is on the label or housing of the unit, visible once it is removed from the car. If you cannot read it, send us a photo. |
For questions about fitment, write to contact@auto24parts.com and give the number on the label.