A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Alfa Romeo ATE 10120208934 10096428593
Vendors's code: 10120208934
Product code: 10096428593
Barcode:
Code 39:
ISBN:
1 300,81 zł
Price
1 300,81 zł
1 600,00 zł
Price
1 600,00 zł
Ask about the product
ABS pump and control module Alfa Romeo ATE 10120208934 10096428593
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Two ATE numbers - 10.1202-0893.4 and 10.0964-2859.3 - is this your ABS unit for an Alfa?
Before you compare numbers, check the symptoms and fault codes. The pump and module unit is used, in working order and original.
Alfa Romeo: ABS 10.1202-0893.4 and 10.0964-2859.3, diagnostics and numbers
The listing is short on numbers: two ATE and nothing more. That makes checking easier, but it demands accuracy. It is for the Alfa Romeo make, and we do not state the model - selection is by part numbers. Proceed like this: notice the symptom, read the fault codes, check the sensors and wiring, then reach for the numbers. The unit is used, in working order and original.
Checking the numbers - the last point
- 10120208934 - ATE number: 10.1202-0893.4
- 10096428593 - ATE number: 10.0964-2859.3
The second number differs from the number in another listing (10.0964-2855.3) by one digit in the third block: 2859 instead of 2855. This is easy to overlook. So look closely at the endings and compare the numbers character by character.
The beginning: symptoms that prompt a check
Checking the unit makes sense when one of the following appears in the car:
- the ABS light comes on and does not go out,
- the module stores a fault after every short drive,
- the ABS does not work during braking, or works irregularly,
- diagnostics report no communication with the module.
Read the fault codes. Inspect the sensor wires and the module connector. Check the fuses. Only then buy the part. After replacement the brakes are bled, and the workshop will assess whether the module needs configuring.
Questions about two numbers
| Are two numbers enough for selection? |
|---|
| Yes, as long as both match your part. A match on just one is not enough. |
| How can I tell this listing from the one with number 10.0964-2855.3? |
| Look at the second number: here it is 10.0964-2859.3, there it is 2855. |
| Is 10096428593 the same as 10.0964-2859.3? |
| Yes, it is the same number written without dots and hyphen. |
| Do you state the model? |
| No, we do not state the model. Selection is by part numbers. |
Copy the ATE numbers from your part and send them to us, and we will check them against the listing.
