A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Alfa Romeo ATE 10120207944 10096428443
Vendors's code: 10120207944
Product code: 10096428443
Barcode:
Code 39:
ISBN:
€284.55
Price
€284.55
€350.00
Price
€350.00
Ask about the product
ABS pump and control module Alfa Romeo ATE 10120207944 10096428443
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
What do ATE numbers 10.1202 and 10.0964 mean in this ABS unit?
A used, working, original ABS pump and control module unit from an Alfa Romeo vehicle. The listing has two ATE numbers: 10120207944 and 10096428443.
Alfa Romeo - ATE unit 10.1202-0794.4 and 10.0964-2844.3
An ATE ABS unit, removed from an Alfa Romeo vehicle. It is used, in working order and original. We do not state the model - selection is by part numbers. It is identified by two ATE numbers from group 10, written in the form 10.xxxx-xxxx.x. The first block, 1202 or 0964, distinguishes the type and the following digits the version. So it is not enough to match just the beginning.
Two ATE numbers
- 10120207944 - ATE number: 10.1202-0794.4
- 10096428443 - ATE number: 10.0964-2844.3
An ATE number can be written with dots and a hyphen or as a string of 11 digits. Both forms mean the same. We do not settle which component each of the two numbers refers to.
Who this listing is for
It is of interest to people who have:
- a faulty ATE ABS unit in an Alfa Romeo,
- an ABS warning light that cannot be cleared,
- a control module fault stored in the diagnostic memory,
- an ABS pump that does not switch on in the test.
First carry out a basic check. Look at the stored faults and check the sensors and wiring. After fitting the unit, bleed the brakes. If the system needs adaptation, the workshop will do it.
Questions and short answers
| How do I write the number 10120207944 in ATE form? |
|---|
| As 10.1202-0794.4. It is the same number, only with dots and a hyphen. |
| Are there Bosch numbers in the listing? |
| No. Both numbers are ATE numbers from group 10. |
| Does the unit work? |
| Yes, it is used, in working order and original. You will find the warranty period in the features table. |
| Do you answer questions about compatibility? |
| Yes. Give us the numbers from your part and we will compare them with the listing. |
Read the ATE numbers from your part and send them to us before ordering. We will compare them with both items.
