A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Alfa Romeo ATE 51775126 10096128043
Vendors's code: 51775126
Product code: 10096128043
Barcode:
Code 39:
ISBN:
€243.90
Price
€243.90
€300.00
Price
€300.00
Ask about the product
ABS pump and control module Alfa Romeo ATE 51775126 10096128043
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Are number 51775126 and ATE 10.0961-2804.3 enough to compare with your part?
A used, working, original ABS pump and control module unit for an Alfa Romeo. We do not state the model - selection is by part numbers. The listing contains exactly two numbers.
Alfa Romeo: ABS unit 51775126 + ATE 10.0961-2804.3, or two numbers to match
Two numbers are not many, but they are enough to judge compatibility honestly. This listing has the part number (OEM) 51775126 and the ATE number 10.0961-2804.3. The ABS unit is used, in working order and original, assigned to the Alfa Romeo make. We do not state the model. If both numbers on your part are identical to ours, choosing this unit makes sense.
A pair of numbers to check
- 51775126 - part number (OEM): 51775126
- 10096128043 - ATE number: 10.0961-2804.3
The ATE number begins with 10.0961, like the ATE number in another listing of ABS units for an Alfa Romeo, but ends differently: -2804.3. The beginning does not settle compatibility; the ending decides. We do not assign the roles of pump or control module to these numbers.
When this unit is worth checking
It is worth considering when the car shows these signs:
- the ABS light does not go out after the engine starts,
- a stored fault points to the ABS pump or control module,
- the ABS pump motor cannot be heard during a system test,
- the ABS switches off and a failure message appears.
Before you buy anything, read the fault codes and check the wheel sensors, connectors and power supply. After fitting the unit, bleed the brakes. Also ask the workshop whether the module needs to be coded or adapted after replacement.
Before you decide
| Are two numbers enough? |
|---|
| Yes, if both match your part digit for digit. If you have only one, contact us. |
| Which number is the OEM number? |
| 51775126. The other, 10.0961-2804.3, is the ATE number. |
| Do you know which Alfa model the unit comes from? |
| We do not state the model. The listing is based on numbers, not on the model. |
| How do I write the ATE number as a string? |
| 10096128043 - without dots and hyphen. |
Prefer to be sure? Send us the numbers from your pump and control module and we will compare them with this listing.
