A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Audi Bosch 0265255815 8W0907379J 0265956241
Vendors's code: 0265956241
Product code: 5C1B-519A3
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
0265255815 - is this the number on your ABS pump?
If your unit shows 0 265 255 815, this used, working Bosch assembly from an Audi could be the right replacement. It comes with control module 8W0 907 379 J - compare both numbers to confirm compatibility.
Bosch hydraulic unit 0265255815 with module 8W0907379J for Audi
The listing covers the complete assembly: the aluminium hydraulic block with its valves, the pump motor and the electronic module bolted to the block. The Bosch number 0 265 255 815 is laser-marked on the top surface of the module housing, and the markings also include the text ‘ZSB Hydroaggregat ESP9’. The control module carries its own numbers: the VAG Group number 8W0 907 379 J and the manufacturer's number 0 265 956 241. A white sticker with a 2D code is attached to the pump motor.
Markings read from this particular unit
- 0265255815 - Bosch number of the hydraulic block (pump) - the main number of this pump, shown on the housing as 0 265 255 815
- 8W0907379J - VAG number of the ABS/ESP control module, on the label: 8W0 907 379 J
- 0265956241 - Bosch number of the control module, written as 0 265 956 241
- 2265106528 - Bosch number from the sticker on the side of the housing: 2 265 106 528 - the label does not say what it refers to
The engraving on the aluminium block is faint and mostly illegible, so the laser-marked number on the housing and the control module label are what you should compare first. Module 0 265 956 241 is also listed in our shop with pump 8W0614517H, so the control module number alone does not settle the choice - what counts is a match on block number 0265255815.
When the ABS unit needs attention
A fault in this component usually gives itself away through:
- no communication with the control module during diagnostics,
- an ABS warning light that stays on,
- a stored pump motor fault code.
First connect a diagnostic tool and read the fault memory, then inspect the wheel speed sensors, fuses, wiring and connector, and the battery - some of these produce exactly the same symptoms. Once the unit is fitted, bleed the brakes; on many VW Group cars the control module also has to be coded, and with ESP a basic setting of the steering angle sensor is usually carried out.
Most common questions about 0265255815
| Which car is this pump intended for? |
|---|
| It comes from an Audi. We do not give the model - the fit is based on the numbers 0 265 255 815 and 8W0 907 379 J, which should match your part. |
| What is the technical condition of the part? |
| It is a genuine Bosch part, used and in working order. The warranty period is given in the product features table. |
| Which number should I compare first? |
| No VAG pump number is visible in the photos of this unit, so the reference point is Bosch block number 0265255815. The second step is to check control module number 8W0907379J. |
| What do the Bosch numbers on this unit mean? |
| 0 265 255 815 is the hydraulic block number and 0 265 956 241 is the control module number. Number 2 265 106 528 comes from the sticker on the side of the housing, which does not describe its role. |
Send us a photo of the markings on your unit or your VIN, and we will check whether this assembly will fit.