A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module AUDI A4 A5 0265239250 8T0614517H 8T0907379F 0265951913
Vendors's code: 8T0614517H
Product code: 0265951913
Barcode:
Code 39:
ISBN:
975,61 zł
Price
975,61 zł
1 200,00 zł
Price
1 200,00 zł
Ask about the product
ABS pump and control module AUDI A4 A5 0265239250 8T0614517H 8T0907379F 0265951913
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Audi A4 A5?
This is a used, working ABS pump with control module for the Audi A4 A5 - numbers 8T0614517H; 0265239250 / 0 265 239 250; 8T0907379F; 0265951913 / 0 265 951 913. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Audi A4 A5
According to the listing, this hydraulic unit with electronics fits the Audi A4 A5. It is a used, working part in good condition - choose it by the numbers in the list.
Numbers to compare
- 8T0614517H - part number (OEM)
- 0265239250 / 0 265 239 250 - ABS pump number (Bosch)
- 8T0907379F - ABS control module number (OEM)
- 0265951913 / 0 265 951 913 - ABS control module number (Bosch)
Application according to the listing
- Audi A4 A5 - model
- Bosch - manufacturer
How an ABS pump with control module works
One module contains two parts: the hydraulic block with valves and pump, and the electronics that control them. Both work together within fractions of a second, especially on slippery surfaces.
Matching
This unit has four markings: Audi number 8T0614517H and Bosch number 0265239250 refer to the hydraulic block, while 8T0907379F and 0265951913 refer to the control module. The quickest check is to compare number 8T0614517H with the label on your pump.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
Before you buy a pump, check the fuse, power supply, earth and wheel speed sensors - a damaged wiring loom or sensor can cause similar symptoms.
Questions and answers
| Where can I find the number on the module? |
|---|
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
