A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Audi Seat Bosch 8E0614517BF 0265234336 4F0910517E 8E0910517H 0265950474
Vendors's code: 0265234336
Product code: 998C-963B5
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Audi Seat Bosch 8E0614517BF 0265234336 4F0910517E 8E0910517H 0265950474
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump 8E0614517BF with control module - is this your number?
Check whether your assembly carries number 8E0 614 517 BF. We are offering a genuine, used and working Bosch unit with control module for Audi and Seat cars, matched by number.
Bosch 8E0614517BF - ABS pump with control module for Audi and Seat
The whole assembly - the hydraulic block with pump and the bolted-on control module - is most often replaced once diagnostics have confirmed a fault in the pump or the module and you want to fit a complete set without separating the components. This listing covers both parts: block 8E0614517BF with Bosch number 0 265 234 336, and the control module with Bosch number 0 265 950 474 and the text ‘ESP’ on its label. The VAG sticker on the control module shows number 8E0 910 517 H, while number 4F0 910 517 E comes from the product data. When you fit a set like this, there is no need to transfer the control module from the old pump.
Five numbers to compare
- 8E0614517BF - VAG number of the ABS pump (hydraulic unit), written as 8E0 614 517 BF
- 0265234336 - Bosch number of the hydraulic block (pump), stamped into the metal of the block: 0 265 234 336
- 4F0910517E - VAG number of the ABS/ESP control module (from the product data), written as 4F0 910 517 E
- 8E0910517H - second VAG number of the control module, visible on its VAG sticker: 8E0 910 517 H
- 0265950474 - Bosch number of the control module, written as 0 265 950 474
The Bosch pump number is stamped into the metal on the front face of the hydraulic block and can be hard to see, so read it in good, angled light; there is also a small barcode sticker on the side of the pump. On the block you will also find the port markings HZ1, HZ2, VL, VR, HL and HR. The same Bosch control module 0 265 950 474 is also listed in our shop with pump 8E0614517AK, so compare the block number with particular care.
When the ABS/ESP assembly may need replacing
Diagnostics are often prompted by:
- the ABS warning light on the dashboard,
- an internal module fault in the fault memory,
- no connection to the control module on the diagnostic tool,
- an illuminated brake warning light.
Before ordering the assembly, ask a workshop to read the fault codes and check the wheel sensors, fuses, wiring, plug and battery. After fitting, the brakes must be bled, and on many cars with ESP the control module also needs coding and the steering angle sensor calibrating.
Key questions about 8E0614517BF
| Which makes is this assembly intended for? |
|---|
| Audi and Seat. You confirm the fit by the numbers - first and foremost 8E0 614 517 BF. |
| What is its technical condition? |
| The part is genuine, used and in working order; the warranty period is given in the product features table. |
| Which number is decisive? |
| The VAG pump number together with the letters BF. Check the control module numbers - 8E0 910 517 H from the sticker and Bosch 0 265 950 474 - as a second step. |
| What do the Bosch numbers mean? |
| 0 265 234 336, stamped into the metal of the block, is the Bosch number of the hydraulic block, i.e. the pump, and 0 265 950 474 is the Bosch number of the control module. |
Send us photos of the numbers on your pump and control module, or your VIN - we will check whether this set is compatible.
