A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Audi Volkswagen Seat 1K0614517AE 1K0907379AC
Vendors's code: 1K0907379AC
Product code: 1K0614517AE
Barcode:
Code 39:
ISBN:
€162.60
Price
€162.60
€200.00
Price
€200.00
In stock
Ask about the product
ABS pump and control module Audi Volkswagen Seat 1K0614517AE 1K0907379AC
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Audi Volkswagen Seat?
This is a used, working ABS pump with control module for the Audi Volkswagen Seat - numbers 1K0 614 517 AE / 1K0614517AE; 1K0 907 379 AC / 1K0907379AC. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Audi Volkswagen Seat
This ABS pump with control module is intended for: Audi Volkswagen Seat (2007-2008). It is a used, working part in good technical condition.
Numbers to compare
- 1K0 614 517 AE / 1K0614517AE - part number (OEM)
- 1K0 907 379 AC / 1K0907379AC - part number (OEM)
Application according to the listing
- Audi Volkswagen Seat - model
- 2007-2008 - year
How an ABS pump with control module works
During normal driving the system is passive and the brakes work conventionally. Only under hard braking does the pump start to pulse, and you can feel vibrations in the brake pedal.
Matching
Compare number 1K0 614 517 AE in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model and year alone. The brake system is critical for safety, so fitting is best left to a workshop that will bleed the brakes and check ABS operation.
Symptoms of a faulty ABS pump
- the ABS warning light comes on straight after starting the engine,
- the diagnostic tester cannot connect to the module,
- the speedometer shows incorrect readings,
- the system works only intermittently.
It is worth reading the fault codes with a diagnostic tool first, because some ABS faults come from wheel sensors or wiring, not from the hydraulic unit itself.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.
