A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump BMW ATE 34516751767 34516751768 10094808023 5WK8467
Vendors's code: 6751768
Product code: 6751767
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How to check whether ABS pump 34516751767 fits your BMW
ABS pump 34516751767 complete with control unit, used and inspected. Compare the numbers with the original in your car.
How to identify ABS pump 34516751767 for your BMW
If the ABS warning light is on in your BMW, one possible cause is the hydraulic module or its control unit. ABS pump 34516751767 is a used original part, inspected before sale. The listing does not state the car model or year, so we do not give them here and match the part by its numbers.
Part number 34516751767 and related numbers
You will find the numbers on the labels, while catalogues list them as a single string:
- 3451 6751767 (catalogue format: 34516751767), BMW number of the ABS pump (hydraulic part),
- 3451 6751768 (catalogue format: 34516751768), BMW number of the ABS pump (hydraulic part),
- 10.0948-0802.3 (catalogue format: 10094808023), control unit number,
- 5WK8467, additional number from the listing.
The full numbers matter, including their endings. If in doubt, send us a photo of your pump.
What ABS problems can point to
- the ABS warning light comes on after the engine is started and stays on,
- the ABS stops working, although basic braking usually remains functional,
- the ABS warning light comes on together with the stability control warning light,
- on a slippery surface the wheels lock up noticeably sooner than they used to.
Before buying a module, read the fault codes with a diagnostic tester. A faulty wheel speed sensor or its wiring can cause the same symptoms, and in that case replacing the pump will not help. After replacement the fault codes usually need to be cleared, and if the brake lines have been disconnected, the system must be bled.
Questions and answers
| Where do I find number 34516751767 on my pump? |
|---|
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Which car model does this pump fit? |
| The listing does not state a model or year, so confirm compatibility with the number from the original pump in your car, or send us a photo of it. |
| Does a lit ABS warning light always mean a faulty pump? |
| No. Read the fault codes first, because the cause may be a wheel sensor, its wiring or too low a supply voltage. |
| Is this a new part? |
| No. We sell used original modules, each one inspected before sale. You will find the warranty period in the product features table. |
Want to be certain? Send us the numbers from the block and sticker on your ABS pump, and together we will check whether this part will fit.