A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump BMW ATE 7707617 10021450034 10096108473
Vendors's code: 7707617
Product code: 10021450034
Barcode:
Code 39:
ISBN:
€813.01
Price
€813.01
€1,000.00
Price
€1,000.00
Ask about the product
ABS pump BMW ATE 7707617 10021450034 10096108473
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does ABS pump 7707617 come complete with the control unit?
Used original ABS module with number 7707617 for BMW. Confirm compatibility with the number from your original pump.
BMW ABS pump: numbers 7707617 and 10021450034
If the ABS warning light is on in your BMW, one possible cause is the hydraulic module or its control unit. ABS pump 7707617 is a used original part, inspected before sale. The listing does not state the car model or year, so we do not give them here and match the part by its numbers.
Part number 7707617 and related numbers
The numbers as written on the labels and as a single string, the way catalogues list them:
- 7707617, BMW number in short form, without the group prefix,
- 10.0214-5003.4 (catalogue format: 10021450034), hydraulic block manufacturer's number,
- 10.0961-0847.3 (catalogue format: 10096108473), control unit number.
Compare the numbers with the original pump in your car, and if any of them differs, write to us before buying.
Symptoms of a faulty ABS pump or control unit
- the ABS activates for no reason during normal braking,
- brake fluid leaks from the hydraulic block, which requires immediate action,
- the ABS warning light comes on together with the stability control warning light,
- on a slippery surface the wheels lock up noticeably sooner than they used to.
ABS faults should not be ignored, because without anti-lock protection the car brakes less well on wet or slippery roads. Diagnosis and fitting are best left to a garage with a suitable scanner.
Questions and answers
| What is the difference between numbers 7707617 and 10021450034? |
|---|
| The module carries several numbers, because it is identified both by the car brand and by the manufacturer of the block and control unit. When matching the part, compare all the numbers. |
| Where do I find number 7707617 on my pump? |
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Can I send a photo for a compatibility check? |
| Yes. Contact us and send a photo of the numbers on your original pump, and we will help you check whether this module will fit. |
| What condition is this ABS module in? |
| It is an original recycled part in good condition, checked by us. Warranty details are in the product features table. |
Want to check before you buy? Send a photo of the block and sticker on your ABS pump and we will check that the numbers match.
