A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Chevrolet Captiva 96851853 25092645904
Vendors's code: 96851853
Product code: 25061334543
Barcode:
Code 39:
ISBN:
731,71 zł
Price
731,71 zł
900,00 zł
Price
900,00 zł
In stock
Ask about the product
ABS pump and control module Chevrolet Captiva 96851853 25092645904
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Chevrolet Captiva?
This is a used, working ABS pump with control module for the Chevrolet Captiva - numbers 96851853; 25.0926-4590.4 / 25092645904. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Chevrolet Captiva
For the Chevrolet Captiva we offer a used ABS pump together with its control module, which you can match by the numbers in the list. It is working and in good condition.
Numbers to compare
- 96851853 - part number (OEM)
- 25.0926-4590.4 / 25092645904 - ABS pump number (ATE)
- 25.0613-3454.3 / 25061334543 - ABS control module number (ATE)
Application according to the listing
- Chevrolet Captiva - model
- ATE - manufacturer
How an ABS pump with control module works
The valves in the hydraulic block open and close many times per second, and the control module monitors their operation continuously. A failure of any of these parts turns on the ABS warning light.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. The electronics and the hydraulic block are matched to each other, so we treat the listing as a set that should be compared with the original by its numbers.
Symptoms of a faulty ABS pump
- ABS does not react to wheel slip,
- ESP or ASR does not switch on,
- power supply faults in the diagnostic memory,
- signs of corrosion are visible on the connector.
Compare all the numbers with the label on your pump, because the same car model may have had several versions.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.
