A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Chevrolet Captiva Antara 96817737 25021203944
Vendors's code: 96817737
Product code: 25092645613
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Chevrolet Captiva Antara - what to check before buying?
This is a used, working ABS pump with control module for the Chevrolet Captiva Antara - numbers 96817737; 25.0212-0394.4 / 25021203944. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Chevrolet Captiva Antara
When the ABS in the Chevrolet Captiva Antara stops working, the pump module with its control unit is often to blame. We offer a used, working unit in good condition.
Numbers to compare
- 96817737 - part number (OEM)
- 25.0212-0394.4 / 25021203944 - ABS pump number (ATE)
- 25.0926-4561.3 / 25092645613 - ABS control module number (ATE)
Application according to the listing
- Chevrolet Captiva Antara - model
- ATE - manufacturer
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
Compare number 96817737 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. Module numbers are written with spaces or as one string. We give both forms to make the part easier to find.
Symptoms of a faulty ABS pump
- valve fault codes appear,
- the ABS works unevenly,
- the warning light stays on even after a sensor replacement,
- the module stops responding after moisture gets in.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Where does this part come from? |
| The pump is used and comes from a dismantled vehicle. We give the manufacturer and OEM numbers in the description so that you can compare them. |
| Can a pump with a different number fit as well? |
| Sometimes yes, but we do not assume that listings are interchangeable. Compare all the numbers with the label on your pump or ask us. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.