A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Chrysler Crossfire ATE A0044319112 10020403914 A1935450132 10094715163
Vendors's code: A0044319112
Product code: A1935450132
Barcode:
Code 39:
ISBN:
€325.20
Price
€325.20
€400.00
Price
€400.00
Ask about the product
ABS pump and control module Chrysler Crossfire ATE A0044319112 10020403914 A1935450132 10094715163
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How does the ABS work in the Crossfire, and how do you recognise the right unit?
A used, working, genuine ABS unit for a Chrysler Crossfire (2004-2008). The listing gives the numbers A0044319112 and A1935450132 and the ATE numbers 10.0204-0391.4 and 10.0947-1516.3, by which matching is done.
ABS unit Chrysler Crossfire (2004-2008) - A0044319112, A1935450132
The ABS prevents the wheels from locking during braking: the control unit compares the signals from each wheel’s speed sensor and, when one wheel slows too sharply, briefly reduces the brake fluid pressure at that wheel. The valve block does this, while the pump restores pressure in the circuit. The whole cycle repeats many times a second. The unit we describe comes from a Chrysler Crossfire (2004-2008) and includes the pump together with the control unit. Because one platform can be fitted with several versions of the system, the numbers decide the match, not the look of the part.
Part numbers and ATE references
- A0044319112 - OEM part number: A 004 431 91 12
- A1935450132 - OEM part number: A 193 545 01 32
- 10020403914 - ATE number: 10.0204-0391.4
- 10094715163 - ATE number: 10.0947-1516.3
Treat the OEM numbers and both ATE numbers as one whole. A match on two of the four numbers is only a warning sign, not confirmation - it is the full set that reduces the risk of a mistake when ordering.
When diagnostics point to the ABS module
This unit comes under suspicion if:
- the ABS warning light stays on after the engine starts,
- the scanner reports an internal module or valve fault,
- the system stops responding under hard braking,
- the control unit does not establish communication with the scanner.
First rule out the cheaper sources of the problem: wheel speed sensors and their wiring, fuses and the battery condition. After replacing the unit the brakes must be bled, and in some cars the module must also be adapted with a scanner.
Technical questions
| Which model does this unit come from? |
|---|
| From a Chrysler Crossfire (2004-2008). Matching is done by the numbers A0044319112, A1935450132 and the ATE numbers in the list above. |
| What are the two ATE numbers in one listing for? |
| They are references from the system manufacturer that let you tell the individual versions of the components apart. We do not assign them a role without confirmation, so compare them together with the OEM numbers. |
| What if my number differs by one letter or digit? |
| Such a difference usually means a different version or revision of the part. Do not assume compatibility - write to us and we will check the number before you buy. |
| Is the unit in working order? |
| Yes, it is a used, genuine and working unit. The warranty period is given in the product features table. |
Not sure about your own numbers? Send them to us together with the VIN and we will check whether they match this unit.
