Skip to main content
English €
English €
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English €
English €
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

ABS pump and control module Chrysler Jeep 68336276AB 232306126

  • Part Type ABS pump with control module
  • Vehicle Make and Model Chrysler Jeep
  • OEM Part Number 68336276AB
  • ABS Pump Part Number 232306-126 / 232306126
  • Warranty 6-month warranty
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
  • Condition Used, working, in good condition
ORYGINAL
with VAT without VAT
Price €350.00
Availability:
product-availability-module In stock
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from €30.00 - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type ABS pump with control module
  • Vehicle Make and Model Chrysler Jeep
  • OEM Part Number 68336276AB
  • ABS Pump Part Number 232306-126 / 232306126
  • Warranty 6-month warranty
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
  • Condition Used, working, in good condition

Does this ABS unit match your number 68336276AB?

This is a used, genuine, working ABS unit with pump and control unit, for the Chrysler and Jeep brands. We do not state the model - matching is done by the numbers 68336276AB and 232306-126.

Go to full description

Chrysler, Jeep ABS pump and control unit - 68336276AB

Which brands? Chrysler and Jeep. That is all the listing tells us, so we do not name a model - matching is done by number.

Which numbers? The main one is the part number (OEM) 68336276AB. Alongside it the listing carries an additional reference, 232306-126, which is not an OEM number.

What condition? The unit with pump and control unit is used, genuine and working.

Numbers from the listing

  • 68336276AB - OEM part number
  • 232306126 - additional reference given in the listing: 232306-126

When comparing, rely on the number 68336276AB. The additional reference is supplementary.

When is a unit like this needed?

Typical situations are:

  • the ABS warning light is on after starting the engine,
  • an ABS module fault is stored in the control unit,
  • no communication with the control unit on the scanner.

Before replacing it, inspect the wheel sensors and wiring and read the fault memory. After fitting the unit, bleed the brakes; the module may also still need to be configured.

Doubts before ordering

Which model is this part for?
We do not state the model. The unit comes from a Chrysler or Jeep car, and matching is done by number.
What does 232306-126 mean?
It is an additional reference given in the listing. The main number is 68336276AB.
Is the part genuine?
Yes, it is genuine, used and working. The warranty is described in the product features table.
What if my number is different?
Write to us with your VIN or the numbers from your part. We will check whether the listing is the right one.

Compare 68336276AB with the number on your part. Have a question? Write to us before you buy.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Water-damaged ABS pump control module or a burnt-out one - what next?

    A water-damaged or burnt-out ABS pump control module most often lights up the dashboard like a 'Christmas tree' (ABS, ESP and the red brake warning light), leaves the diagnostic tool unable to communicate with the ABS module, makes the pump motor run non-stop or stops the speedometer working. Water usually gets into the module when the scuttle panel drains are blocked, after the engine bay has been cleaned with a pressure washer or after driving through a deep puddle, while a burnout is most often caused by a short circuit or a voltage spike. Below we describe the symptoms, what to do straight away and why drying or repairing such a module rarely gives lasting results.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more
  • How to test an ABS module and pump - failure symptoms and checks

    The most common symptom of a faulty ABS pump or ABS module is an ABS warning light that stays on after the engine starts, often together with the ESP light. The brakes still work, but without ABS the wheels can lock under hard braking. To test an ABS module, start by reading the fault codes with a diagnostic tool that can talk to the ABS unit, then check the power supply, the earth and the wheel speed sensors. Only when all of these are fine is the module itself usually to blame.

    Read more