A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Citroën C3 Picasso 1.6 HDI ATE 9666999580 10020604144 10096039243
Vendors's code: 10020604144
Product code: 9666999580
Barcode:
Code 39:
ISBN:
$287.97
Price
$287.97
$354.20
Price
$354.20
Ask about the product
ABS pump Citroën C3 Picasso 1.6 HDI ATE 9666999580 10020604144 10096039243
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.36
-
shipping
(Poland)
from
$30.36
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
What does number 9666999580 on an ABS pump mean?
Used ABS pump with control unit, number 9666999580, inspected before sale. Matched by the numbers on the block and sticker.
Is ABS pump 9666999580 the right part for your Citroën?
The hydraulic block and control unit of this ABS pump form a single module that works with the wheel speed sensors in Citroën C3 Picasso 1.6 HDI cars. You will find number 9666999580 on the label, and the full set of numbers is given in the description below. According to the listing, the pump comes from the Citroën C3 Picasso 1.6 HDI model.
Where to find the numbers on an ABS pump
You will find the numbers on the labels, while catalogues list them as a single string:
- 9666999580, original Citroën number,
- 10.0206-0414.4 (catalogue format: 10020604144), hydraulic block manufacturer's number,
- 10.0960-3924.3 (catalogue format: 10096039243), control unit number.
The full numbers matter, including their endings. If in doubt, send us a photo of your pump.
What ABS problems can point to
- the ABS warning light comes on after the engine is started and stays on,
- the ABS activates for no reason during normal braking,
- brake fluid leaks from the hydraulic block, which requires immediate action,
- on a slippery surface the wheels lock up noticeably sooner than they used to.
Before buying a module, read the fault codes with a diagnostic tester. A faulty wheel speed sensor or its wiring can cause the same symptoms, and in that case replacing the pump will not help. After replacement the fault codes usually need to be cleared, and if the brake lines have been disconnected, the system must be bled.
Questions and answers
| What is the difference between numbers 9666999580 and 10020604144? |
|---|
| The module carries several numbers, because it is identified both by the car brand and by the manufacturer of the block and control unit. When matching the part, compare all the numbers. |
| Can I send a photo for a compatibility check? |
| Yes. Contact us and send a photo of the numbers on your original pump, and we will help you check whether this module will fit. |
| Who makes this module? |
| The module is made by ATE. The manufacturer's name does not change the numbers you should use to match the part. |
| What condition is this pump in? |
| It is a used original part, inspected before sale. You will find the warranty period in the product features table. |
Want to check before you buy? Send a photo of the block and sticker on your ABS pump and we will check that the numbers match.
