A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Citroen Peugeot 9678416280 10022000674
Vendors's code: 9678416280
Product code: 28515050133
Barcode:
Code 39:
ISBN:
325,20 zł
Price
325,20 zł
400,00 zł
Price
400,00 zł
Ask about the product
ABS pump and control module Citroen Peugeot 9678416280 10022000674
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Citroen Peugeot - what to check before buying?
This is a used, working ABS pump with control module for the Citroen Peugeot - numbers 9678416280; 10.0220-0067.4 / 10022000674. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Citroen Peugeot
When the ABS in the Citroen Peugeot stops working, the pump module with its control unit is often to blame. We offer a used, working unit in good condition.
Numbers to compare
- 9678416280 - part number (OEM)
- 10.0220-0067.4 / 10022000674 - ABS pump number (ATE)
- 10.0915-1170.3 / 10091511703 - ABS control module number (ATE)
- 28.5150-5013.3 / 28515050133 - ABS control module number (ATE)
Application according to the listing
- Citroen Peugeot - model
- ATE - manufacturer
How an ABS pump with control module works
One module contains two parts: the hydraulic block with valves and pump, and the electronics that control them. Both work together within fractions of a second, especially on slippery surfaces.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. Modules differ, among other things, in the layout of the brake line ports and the connector. Always compare the numbers and the appearance of your pump with the unit in the listing.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
