A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Daihatsu Cuore 44510B2010 8415D0673
Vendors's code: 44510B2010
Product code: DHT2WD84101
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Daihatsu Cuore 44510B2010 8415D0673
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for Daihatsu Cuore – what to check before buying?
This is a used, working ABS pump with control module for the Daihatsu Cuore – numbers 44510 B2010 / 44510B2010; 8415D0673. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Daihatsu Cuore
According to the listing, this hydraulic unit with electronics fits the Daihatsu Cuore. It is a used, working part in good condition – choose it by the numbers in the list.
Numbers to compare
- 44510 B2010 / 44510B2010 – part number (OEM)
- 8415D0673 – part number (OEM)
- DHT-2WD-8410-1 / DHT2WD84101 – part number (OEM)
Application according to the listing
- Daihatsu Cuore – model
How an ABS pump with control module works
During normal driving the system is passive and the brakes work conventionally. Only under hard braking does the pump start to pulse, and you can feel vibrations in the brake pedal.
Matching
Compare number 44510 B2010 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. The electronics and the hydraulic block are matched to each other, so we treat the listing as a set that should be compared with the original by its numbers.
Symptoms of a faulty ABS pump
- an ABS fault appears after replacing the battery,
- the voltage at the module is unstable,
- the brake and ABS warning lights come on together,
- the brakes work, but without ABS assistance.
Check the level and condition of the brake fluid; old or contaminated fluid accelerates wear of the valves in the hydraulic unit.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
Send questions about compatibility to contact@auto24parts.com – state the model, year and the number from the module.
