A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Dodge Jeep Chrysler ATE P04779733AA 25021216624 25092852024 25061933943
Vendors's code: P04779733AA
Product code: 25061933943
Barcode:
Code 39:
ISBN:
€81.30
Price
€81.30
€100.00
Price
€100.00
Ask about the product
ABS pump Dodge Jeep Chrysler ATE P04779733AA 25021216624 25092852024 25061933943
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does ABS pump P04779733AA come complete with the control unit?
Used original ABS module with number P04779733AA for Dodge Jeep Chrysler. Confirm compatibility with the number from your original pump.
Used Dodge Jeep Chrysler ABS pump with number P04779733AA
If the ABS warning light is on in your Dodge Jeep Chrysler, one possible cause is the hydraulic module or its control unit. ABS pump P04779733AA is a used original part, inspected before sale. According to the listing, the pump comes from the Dodge Jeep Chrysler model.
Part number P04779733AA and related numbers
You will find the numbers on the labels, while catalogues list them as a single string:
- P04779733AA, original Dodge number,
- 25.0212-1662.4 (catalogue format: 25021216624), hydraulic block manufacturer's number,
- 25.0928-5202.4 (catalogue format: 25092852024), control unit number,
- 25.0619-3394.3 (catalogue format: 25061933943), additional number from the listing.
Check the numbers on your pump and compare them with those above. If any of them differs, contact us before ordering.
Symptoms of a faulty ABS pump or control unit
- the ABS stops working, although basic braking usually remains functional,
- the pump motor switches on at unusual moments or runs louder than usual,
- brake fluid leaks from the hydraulic block, which requires immediate action,
- the ABS switches itself off shortly after the engine is started.
ABS faults should not be ignored, because without anti-lock protection the car brakes less well on wet or slippery roads. Diagnosis and fitting are best left to a garage with a suitable scanner.
Questions and answers
| Where do I find number P04779733AA on my pump? |
|---|
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Does a lit ABS warning light always mean a faulty pump? |
| No. Read the fault codes first, because the cause may be a wheel sensor, its wiring or too low a supply voltage. |
| Can I send a photo for a compatibility check? |
| Yes. Contact us and send a photo of the numbers on your original pump, and we will help you check whether this module will fit. |
| What condition is this ABS module in? |
| It is an original recycled part in good condition, checked by us. Warranty details are in the product features table. |
Want to check before you buy? Send a photo of the block and sticker on your ABS pump and we will check that the numbers match.
