A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Fiat 500 52122933
Vendors's code: 52122933
Product code: abs_52122933
Barcode:
Code 39:
ISBN:
€203.25
Price
€203.25
€250.00
Price
€250.00
In stock
Ask about the product
ABS pump and control module Fiat 500 52122933
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Fiat 500?
This is a used, working ABS pump with control module for the Fiat 500 - numbers 52122933. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Fiat 500
If the ABS warning light is on in your Fiat 500 or the brake system reports faults, the pump with control module may be the cause. We sell a used, working unit in good condition.
Numbers to compare
- 52122933 - part number (OEM)
Application according to the listing
- Fiat 500 - model
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. Car versions differ in, among other things, ESP, brake type and engine. Compare the numbers with your pump or with the vehicle documents.
Symptoms of a faulty ABS pump
- the ABS and brake warning lights do not go out after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors work,
- the module overheats or resets.
Inspect the control module connector: corrosion or burnt contacts cause symptoms similar to faulty electronics.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
