A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Fiat Doblo 46767474 10020402844
Vendors's code: 10020402844
Product code: 46767474
Barcode:
Code 39:
ISBN:
€142.28
Price
€142.28
€175.00
Price
€175.00
Ask about the product
ABS pump and control module Fiat Doblo 46767474 10020402844
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Fiat Doblo?
This is a used, working ABS pump with control module for the Fiat Doblo - numbers 46767474; 10.0204-0284.4 / 10020402844. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Fiat Doblo
For the Fiat Doblo we offer a used ABS pump together with its control module, which you can match by the numbers in the list. It is working and in good condition.
Numbers to compare
- 46767474 - part number (OEM)
- 10.0204-0284.4 / 10020402844 - ABS pump number (ATE)
- 10.0949-1602.3 / 10094916023 - ABS control module number (ATE)
Application according to the listing
- Fiat Doblo - model
- ATE - manufacturer
How an ABS pump with control module works
In cars with ESP or traction control, the same module can also build up pressure at a selected wheel to stabilise the vehicle. The range of functions depends on the equipment of the specific car.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. Modules differ, among other things, in the layout of the brake line ports and the connector. Always compare the numbers and the appearance of your pump with the unit in the listing.
Symptoms of a faulty ABS pump
- the ABS and brake warning lights do not go out after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors work,
- the module overheats or resets.
Inspect the control module connector: corrosion or burnt contacts cause symptoms similar to faulty electronics.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Where does this part come from? |
| The pump is used and comes from a dismantled vehicle. We give the manufacturer and OEM numbers in the description so that you can compare them. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
