A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Fiat Doblo 51773386 10020700694
Vendors's code: 10020700694
Product code: 10097016023
Barcode:
Code 39:
ISBN:
€121.95
Price
€121.95
€150.00
Price
€150.00
Ask about the product
ABS pump and control module Fiat Doblo 51773386 10020700694
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Fiat Doblo - is this the right ABS pump for your car?
This is a used, working ABS pump with control module for the Fiat Doblo - numbers 517 73 386 / 51773386; 10.0207-0069.4 / 10020700694. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Fiat Doblo
The set in this listing (ABS pump and control module) runs the anti-lock braking system in: Fiat Doblo. Match it by the numbers in the list. It is used, working and in good condition.
Numbers to compare
- 517 73 386 / 51773386 - part number (OEM)
- 10.0207-0069.4 / 10020700694 - ABS pump number (ATE)
- 10.0970-1602.3 / 10097016023 - ABS control module number (ATE)
Application according to the listing
- Fiat Doblo - model
- ATE - manufacturer
How an ABS pump with control module works
The return pump motor runs only when ABS is active. The rest of the time it puts no load on the electrical system, but together with the valves it is one of the parts most exposed to wear.
Matching
The number 517 73 386 also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. The same car model may have had several module versions, depending on drive, equipment and year. The numbers in the list help to tell these versions apart.
Symptoms of a faulty ABS pump
- an ABS fault appears after replacing the battery,
- the voltage at the module is unstable,
- the brake and ABS warning lights come on together,
- the brakes work, but without ABS assistance.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
